Quilt Hoop Bow Holder Tutorial

I’m swinging by this Saturday night to show off a little weekend crafting. I’m trying to knock out all the little projects that are left for the baby’s room in small chunks instead of subjecting myself to a tortuous sewing marathon. That’s pretty much my approach to life in general these days, just taking what I can in small chunks.

I had to leave Target after *only* getting what was on my list the other day out of sheer exhaustion. *GASP* Can you imagine?! I didn’t even have the energy to browse the baby section or the accessories! I was winded after just 15 minutes. Shockingly, I managed to keep the bill to under $50 that time, which NEVER happens. Target owns me.

So my small chunk today was to knock out a fun little craft that serves as wall decor and a bow holder for all those adorable little bows baby girl will undoubtedly collect as she grows older. My collection right now is pretty pathetic, but I can’t wait to fill this whole thing up. Yes, I am unashamedly in love with bows on baby girls (but I draw the line when the bow is so large it makes the baby look like a helicopter).

Love! I was inspired by this tutorial for a bow holder made from a picture frame and by this simple tutorial for wall art made from fabric scraps and quilt hoops. I needed something to go above the dresser/changing table and love how this incorporates the fabrics I’m using and the function of a bow holder.

What you need:

1 18×27 Quilt Hoop ($9.95 at Hancock Fabrics)
1 yard fabric (main fabric uses)
3 yards ribbon OR  1/4 yard (or scrap) of accent fabric
hot glue gun

I’ve also kissed and made up with my Olfa Rotary Cutter and found it to be pretty helpful for this project.

If you’re going the ribbon route, you can just skip this step. If you’re like me, though, and want to use an accent fabric, you need to do the following.

Cut 2 3 inch wide strips the width of your fabric. (I think my fabric was 54ish inches wide, if yours is substantially shorter, make adjustments accordingly.)

Fold each strip right side together, lengthwise and press.

Sew up the side with a 1/4 inch seam allowance, leave both ends open.

Then cut 20 inches off each strip, leaving one a little shorter than the other and giving 4 in total. Then turn each one right side out and press with the seam in the middle.

Before you start putting it together, make sure your main fabric is pressed and looking nice, then lay your main fabric over the top of the inner circle of the quilting hoop, lining the pattern up how you’d like. Don’t worry, you can still make small adjustments from here. Once you’ve got that positioned, lay the ribbon or the strips of fabric where you’d like them. I just eyeballed it. Then press your outer loop over the fabric laid on top of the inner loop.

Flip it over and pull the fabric and ribbon/strips tight. Then trim your fabric leaving about an inch of fabric around the edge.

Add a bead of hot glue, a few inches at a time, around the inside of the hoop, pull the fabric over and adhere. Once you’ve glued all the main fabric, fold over the ribbon/strips (making sure to adjust the tension one last time) and glue down.

Flip it over, admire and hang on the wall. Add adorable bows and say “Awwww!”

Oops! I’ve already shown you more of the nursery than I wanted to. I’m holding out on giving you more until the grand reveal… you know, unless I come up with any more fun crafts between now and then.

  • TheNextMartha - Very cute.ReplyCancel

  • Mary - I absolutely LOVE this idea! I really need to make one of these for my daughter’s barrettes and bows. Thanks for sharing! (And look at you not hating your Olfa rotary cutter! :-) They really are one of the best tools ever!)ReplyCancel

  • Sam - That is so awesome! We totally need one of those. My daughter’s hair barrettes are all thrown in a tupperware container. Classy eh? It’s such a pain to find a matching pair. I think I’m going to try to add some sort of hooks on the bottom for headbands.ReplyCancel

    • guarros - Wait? Is the Tupperware where you are “not” supposed to put them? That’s what we do too! This, however, is AWESOME. I’ve been wanting to do something like this / with an empty frame of sorts but I haven’t found one I like. I love this idea, instead!ReplyCancel

  • kk @ the mom diggity - This is super cute…but way too small for all our bows ;) ReplyCancel

  • Alexandria - I need one for me and all my bows!ReplyCancel

  • tobasco - I love this! Now, if only my 15 month old had enough hair to warrant having bows. We own not-a-one, and won’t need to for a loooong time. But hey, that gives me plenty of time to do this project!ReplyCancel

  • nanann - just wanted to thank you for the mention!ReplyCancel

  • I Like Big Bows, And I Can Not Lie | Baby Rabies - [...] at how pretty Leyna’s Quilt Hoop Bow Holder  is, all filled up with pretty, bright [...]ReplyCancel

  • Alton Gandolfo - I have been browsing on-line greater than 3 hours today, but I by no means identified any interesting report like yours. It is pretty worth enough for me. In my see, if all webmasters and bloggers made excellent articles material as you most likely did, the net will likely be much more useful than ever before.ReplyCancel

  • Danny Monterrosa - A powerful share, I simply given this onto a colleague who was doing somewhat evaluation on this. And he actually purchased me breakfast as a result of I discovered it for him.. smile. So let me reword that: Thnx for the deal with! However yeah Thnkx for spending the time to debate this, I really feel strongly about it and love studying extra on this topic. If potential, as you turn out to be experience, would you thoughts updating your weblog with extra particulars? It’s extremely useful for me. Huge thumb up for this weblog submit!ReplyCancel

Your email is never published or shared. Required fields are marked *

*

*